The main role of the screw chiller is to provide chilled water to the equipment products to achieve the purpose of cooling. And after we buy the screw chiller back, in the process of using, familiar with the safety operating procedures is an essentia...

Calculate heat generation Q=SH×De×F×DT/60 by the temperature difference between inlet and outlet of cooling oil Q: heat generation KW (Note: the heat generation of 1P oil cooler is about 2.5KW) SH:Specific heat of specific heat oil is 1.97KJ/Kg...

The industrial refrigeration unit is an environmentally friendly product without compressor, cold coal and pollution. It uses the principle of evaporative cooling of the whole fresh air outside and convection air exchange with the room to achieve the...

The chiller cooling principle is: when the fan runs into the cavity to generate negative pressure, so that the air outside the machine flows over the surface of the porous wet curtain forcing the dry bulb temperature of the air over the curtain to dr...

1、The principle of low-temperature refrigeration unit Low-temperature refrigeration machine because of its key components, the unit from the evaporator out of the state of the gas refrigerant; by the compressor after adiabatic compression, into a ...